FAQ

Stock samples are dispatched within 3 days post-payment, while mass production takes around 15 workdays.

No, our industrial touch screens are designed to operate flawlessly even with dirt, fingerprints, or liquid on their surface, ensuring uninterrupted performance of the interactive screen.

We use materials in our HMI panels that are highly resistant to industrial chemicals and gases. However, the level of resistance varies based on factors like concentration, exposure duration, and temperature. We provide a comprehensive chart detailing the chemical tolerance of each material used in our HMI products. For chemicals not listed or for additional queries, our engineering team is available to assist.

Yes, our HMI displays are equipped for both indoor and outdoor use. When using outdoors, consider factors like direct sunlight affecting screen visibility and operating within the prescribed temperature range (0° to 50°C for operation, -20° to 60°C for storage). Our industrial touch screens, particularly those with a polyester cover sheet, might be sensitive to UV radiation. We offer alternative screens, like PCAP, better suited for outdoor conditions. Contact our sales team for more details.

Low-temperature ink (standard product, requiring pre-tempering before silk screening, operating at 180-200°C), high-temperature ceramic ink (used outdoors, incompatible with AG process due to its process of silk screening before tempering, melting ink at approximately 800°C), and UV-resistant ink (also known as all-black ink, scratch-resistant and high-temperature resistant, similar process to low-temperature ink, prevents ink from falling off, with a minimum order quantity (MOQ) of about 200-300 pieces).

Touchscreens use UV-resistant adhesive material for bonding, blocking over 99% UV and more than 75% IR, effectively preventing LCD black spots and extending product life. The adhesive used for bonding touchscreen cover glass and sensor is not very expensive.

The glass surface is smooth, so a protective film is applied to prevent contamination. If stored for a long time, moisture from the air can penetrate through the PE film to the glass, causing chemical reactions that lead to mold or dirt. For minor cases, cleaning with acids like white vinegar is used.

La serigrafía ya no se utiliza debido a problemas de fallas funcionales y rendimiento eléctrico inestable. La luz amarilla es más estable que el láser, los patrones de grabado (revelado) son mejores con la luz amarilla y el costo de la luz amarilla de molibdeno-aluminio-molibdeno es significativamente mayor que el láser. Actualmente, la empresa utiliza tecnología láser para la producción de sensores.

Cambiar a Windows 7 o superior generalmente no tiene ningún impacto, pero cambiar a otros sistemas puede requerir cargar controladores.

Transmittance is 85%-90%, and hardness is >6H. The default hardness for company cover plates is 7H, but higher hardness can be negotiated with suppliers based on customer requirements.