10.1 Inch IP65 Waterproof Industrial HMI Touch Screen Panel - Wall-Mounted & Customizable for Harsh Environments
 
 
Parameters
 
Product model
EG-SY-10.1-A-1609V1
Type
Projective Capacitive
Connector
COB
Screen Diagonal
10.1 [16:9]
Structures
G+G
Outline Dimension
153.20(W)*251.00(L)±0.2mm
View Area
126.20(W)*224.00(L)±0.2mm
Active Area
127.20(W)*225.00(L)±0.2mm
Sensor Thickness
0.55±0.05mm
Cover Thickness
2.0±0.2mm
Total Thickness
2.75±0.2mm
Tail Length
65.07mm
Transmittance
>85%
Input Mode
Finger
Support Points
1~10
Interface
USB
Supply Voltage
USB 5 V
Power Consumption
＜0.6 W
Report Rate
＞100 Hz
Response Time
＜50 ms
Linearity
X≦1.0%, Y≦1.0%
Life Time
＞50,000,000 times
Touch Type
capacitive touch
Waterproof Rated 
IP65
 
Comprehensive Solutions to Improve Outdoor Environmental Adaptability of Touch Screens
1.Waterproof sealant is applied around the entire screen module, paired with high and low temperature resistant silicone rubber gaskets, to block humid air, rainwater and dust from seeping into the display through frame gaps.
 
2.Eliminate air-gap frame bonding structure. The cover glass, touch layer and LCD screen are fully laminated with UV-resistant, low-hygroscopicity OCA optical adhesive. No air or water storage space remains inside, fundamentally eliminating interlayer condensation and watermark residue.
 
3.A moisture-proof passivation protective layer is added on the ITO touch layer to prevent oxidation and electric leakage when exposed to water vapor, lowering touch drift caused by condensation.
 
4.Wide-temperature and moisture-resistant industrial LCD panels and polarizers are adopted, supporting thermal cycling ranging from -40℃ to 85℃ without white spots or watermarks under condensation conditions.
 
5.The outer surface of the cover glass is coated with high-density anti-fingerprint (AF) coating, enabling condensed water droplets to slide off rapidly and preventing persistent water infiltration into frame gaps.
 
FAQ
1.Q: How to stop moisture, rain and dust from seeping into the screen through frame gaps outdoors?
A: Waterproof sealant is fully applied around the screen module, matched with high-low temperature resistant silicone rubber gaskets to block external humid air, rainwater and dust penetration.
 
2.Q: Why abandon traditional air-gap frame bonding and adopt full lamination process?
A: Cover glass, touch layer and LCD are fully bonded with UV-resistant low-hygroscopic OCA glue without internal air or water storage space, fundamentally solving interlayer condensation and residual watermarks.
 
3.Q: What protection avoids ITO oxidation and touch drift when condensation occurs?
A: A moisture-proof passivation protective layer is coated on the ITO touch layer to prevent oxidation and electric leakage caused by water vapor and reduce touch drift.
 
4.Q: Can the display work stably under extreme temperature and heavy dew conditions?
A: Equipped with wide-temperature moisture-resistant industrial LCD and polarizers that withstand -40℃~85℃ thermal cycling, free of white spots and watermarks in condensation environments.
 
5.Q: How to prevent condensed water from soaking into frame seams for a long time?
A: A high-density outer AF anti-fouling coating makes condensed water droplets slide off quickly and avoids persistent water infiltration along frame gaps.