15 Inch PACP Multi Capacitive Waterproof Touch Panel - Custom Options for POG, W
Size
15 inch
Screen Diagonal
4:3
Structure
G+G
Touch controller
EETI / ILITEK
Surface hardness
>6H
Waterproof
IP65
Sensor glass Thickness
0.55mm±0.05mm
Cover lens Thickness
2.0mm±0.2mm
Total Thickness
2.75±0.2mm
Sensor Proces
Print Process(ITO Pattern) + laser line(Ag)
Resolution
1920*1080, 1024 x 768, 4096*4096, 3840*2160, Other
Response Time
＜25 ms
Tail Length
100.71mm
Touch point
10 points
Chamfer
R5 mm
Interface Type
USB,RS232,I2C
Warranty
3 years
 
Solutions to Improve Impact Resistance of Touch Screens for Outdoor Use
1.The entire perimeter of the screen module is fully wrapped with high-density low-temperature resistant silicone buffer gaskets, eliminating rigid contact between the housing, cover glass and LCD panel. The gaskets absorb sustained operational vibration and impact shock, preventing edge stress cracking as well as OCA delamination and debonding.
 
2.Double-layer shock-absorbing rubber mats are added to the complete machine mounting bracket. Bolts are fitted with lock washers and coated with thread locker to prevent screw loosening and screen displacement caused by long-term vibration.
 
3.The internal FPC touch flexible cable is reserved with redundant bending allowance and fixed with foam pressing strips, avoiding intermittent touch failure caused by wire pulling under vibration.
 
4.Detachable hollow steel anti-collision grilles are installed at high-risk breakage stations such as loaders and excavators to block frontal impacts from large gravel. A foldable integrated sunshade protective cover can be fitted when idle.
 
5.The metal screen frame is equipped with widened and thickened guard edges to focus protection on the fragile four corners of the glass. A detachable wear-resistant PC protective plate is optionally installed on the outer side; impacts will damage the PC plate first, lowering replacement costs.
 
6.Industrial wide-temperature LCD panels and touch ICs supporting -40℃~85℃ are adopted, eliminating black screens, motion blur and unresponsive touch in low-temperature environments.
 
7.The housing is fitted with ePTFE waterproof and breathable valves to balance internal and external air pressure amid day-night temperature differences, preventing negative pressure from drawing in moist air. The valves allow air passage while blocking water and dust, fundamentally reducing internal condensation.
 
8.The cover glass features a dense hydrophobic AF coating, enabling mud and mineral slurry to be wiped off effortlessly with minimal adhesion and penetration into frame gaps. The surface can be rinsed promptly after equipment shutdown to remove accumulated mineral dust and slurry, preventing corrosion of the sealing structure.
 
FAQ
1.Q: How to avoid screen cracking and OCA delamination under long-term vibration of construction machinery?
A: The screen module is fully wrapped with high-density low-temperature resistant silicone buffer gaskets to eliminate rigid contact between housing, glass and LCD. It absorbs continuous vibration and impact, preventing corner stress cracking and OCA debonding.
 
2.Q: What measures prevent loose screws and screen displacement caused by persistent vibration?
A: Double-layer shock-absorbing rubber mats are installed on mounting brackets. Bolts are matched with lock washers and thread locker to stop loosening and screen shifting under long vibration.
 
3.Q: How to solve intermittent touch failure caused by vibration pulling FPC cables?
A: The internal FPC touch cable reserves redundant bending margin and is fixed with foam pressure strips to avoid wire tension and intermittent disconnection under vibration.
 
4.Q: What extra protective fittings are available for excavator and loader mining workstations against heavy stone impact?
A: Detachable hollow steel anti-collision grilles can be installed to block frontal large gravel impact; foldable integrated sunshade protective covers are optional for idle equipment. Detachable wear-resistant PC guard plates are also available as outer protection with low replacement cost.
 
5.Q: How does the ePTFE breathable valve reduce internal condensation in mining equipment?
A: It balances internal and external air pressure during temperature changes to avoid negative pressure inhaling humid air. Air can pass through while water and dust are blocked, cutting condensation at the source.