Specifications:
Cover surface hardness： ≥7H
Ink adhesion：≥4B
Impact resistance：≥IK07
Lamination to display：Air bonding(gap 1mm)
Support Touch Points：10 points Typ.
Controller Interface：USB Typ.
Controller Supply Voltage：USB 5V Typ.
Features of touch display module 15.6 inch
1.Compared with full lamination process, the frame bonding process is relatively simple with much lower processing cost. It features shorter lead time in mass production and delivers obvious cost advantages.
2.Flexible structural adaptation and strong versatility. It boasts high compatibility of cutouts and mounting holes, requiring no major mold modifications for complete machine structural design and enabling a short R&D cycle.
3.The TP touch panel and LCD display can be disassembled and replaced separately. If the screen is broken, only the touch layer needs replacement instead of the entire screen assembly. It features low after-sales maintenance cost and fast part replacement. On-site assembly and disassembly are available without professional lamination equipment, greatly simplifying terminal operation and maintenance.
4.Frame bonding is a mature and straightforward process featuring high mass production yield and ample production capacity.Standard versions with common molds are always in stock, with a far shorter lead time than customized full lamination solutions.It is well suited for urgent orders and bulk stock preparation.
5.Better resistance to mechanical stress and less prone to screen cracking.With an air gap for buffering, the panel delivers higher crack resistance and toughness when the device bears force or encounters slight vibration.
6.It supports easy customization of capacitive/resistive options, interface definition, backlight brightness and FPC cable position.Small-batch customization is also available without high costs for mold opening and lamination process investment.
FAQ
1.What are the main advantages of frame bonding compared with full lamination?
Frame bonding features simpler process, lower cost, shorter lead time, higher production yield, easier maintenance and better mechanical stress resistance.
2.Can the touch panel and display be replaced separately with frame bonding?
Yes, the TP touch panel and LCD display can be disassembled and replaced independently. Only the damaged part needs to be changed, which greatly reduces maintenance cost.
3.Is small-batch customization supported for frame bonding products?
Yes, frame bonding supports flexible customization such as capacitive/resistive type, interface, backlight and FPC position with low mold cost, which is friendly to small-batch orders.
4.Why is frame bonding suitable for urgent and bulk orders?
Frame bonding is a mature process with high yield and sufficient capacity. Standard common-mold products are in stock all year round, with much shorter delivery time than customized full lamination.
5.Does frame bonding have better anti-cracking performance?
Yes, the air layer in frame bonding provides effective buffer, so the screen has stronger toughness against stress and vibration, and is less likely to crack or burst.
